About WOE | Apprenticeship | Contact Us | Classes | Directions | Training Staff | Links

 

THREE WEEK CLASSES

TWO WEEK CLASSES
ONE WEEK CLASSES
FOUR DAY CLASSES
THREE DAY CLASSES
TWO DAY CLASSES
ONE DAY CLASSES
COMMENTS

 
2012 SKILL IMPROVEMENT REGISTRATION FORM

FOR MEMBERS OF LOCAL 139 ONLY

ALL CLASSES AT COLOMA UNLESS OTHERWISE INDICATED.
CLASS HOURS: 8:00 A.M. - 4:30 P.M.

 

ALL APPLETON CLASSES WILL BE HELD AT FOX VALLEY TECHNICAL COLLEGE

 

HOW TO USE THE REGISTRATION FORM

1. Fill out your personal information below.
--- An e-mail address is required.

2. Choose your classes.

3. Submit form.

IMPORTANT! YOU MUST SELECT A 1ST, 2ND OR 3RD CHOICE FROM THE DROP-DOWN MENU (WHERE THE ZERO IS-CLICK ON THE DOWN ARROW FOR CHOICE) OR YOUR CLASS SELECTION WILL NOT SHOW UP ON THE SUBMITTED CONFIRMATION PAGE.

FOR CLASS DATES USE THE DROP-DOWN MENU TO SELECT A CLASS.
(CLICK ON THE DOWN ARROW FOR DATES),

Example: CLICK ON THE ARROW AT THE END OF EACH DROP-DOWN MENU
CHOICE ADDD CLASS DATES

THIS IS HOW IT SHOULD LOOK AFTER YOU CHOOSE YOUR CLASS

If you wish to sign up for more than one date for the same class - submit the form again or type your additional choices in the comments section.

 

SKILL IMPROVEMENT

REGISTRATION 2012

Tip: Use the tab key to go from one box to the next.
Hitting the enter key will send the form.

UNION REGISTRATION # REQUIRED* :
(NUMBER ON YOUR UNION CARD -* Note: If you are a new member, call 1-800-779-2173 for instructions.)                                  

FIRST NAME REQUIRED*:    M. I. REQUIRED*:    

LAST NAME REQUIRED*: 

ADDRES S REQUIRED*:  

Apt./Suite:

CITY REQUIRED*:     STATE REQUIRED*:     ZIP REQUIRED*: 

PHONE REQUIRED*: CELLPHONE REQUIRED*:  

E-MAIL ADDRESS: REQUIRED:  

EMERGENCY CONTACT PERSON:  

EMERGENCY CONTACT PHONE:

 CURRENT OR LAST EMPLOYER:

 

CLASSES
THREE WEEK CLASSES -
IUOE Pipeline Classes
Fill out the Pipeline Training Application and mail or FAX it to the training center.
TWO WEEK CLASSES -. Choose your 1st, 2nd, or 3rd choices by using the drop-down menu next to the zero. (CLICK ON THE DOWN ARROW FOR CHOICE). For class dates use the drop-down menu next to the class. (CLICK ON THE DOWN ARROW FOR DATES). If you wish to sign up for more than one date for the same class - submit the form again or type your additional choices in the COMMENTS section.
IMPORTANT! YOU MUST SELECT A 1ST, 2ND OR 3RD CHOICE FROM THE DROP-DOWN MENU (WHERE THE ZERO IS)  OR YOUR CLASS SELECTION WILL NOT SHOW UP ON THE SUBMITTED CONFIRMATION PAGE. If you wish to sign up for more than one date for the same class - submit the form again or type your additional choices in the COMMENTS section.
Basic Equipment
CHOICE----____CLASS DATES
Basic Crane
CHOICE----____CLASS DATES
Heavy Highway
CHOICE----____CLASS DATES
Motor Grader
CHOICE----____CLASS DATES
Basic Excavating
CHOICE----____CLASS DATES
Asphalt Paving
CHOICE----____CLASS DATES
 Directional Drilling
CHOICE----____CLASS DATES
Lattice Crane
CHOICE----____CLASS DATES
Dozer
CHOICE----____CLASS DATES
Advanced Excavating
CHOICE----____CLASS DATES
Advanced Crane
CHOICE----____CLASS DATES

One week, three day, two day, and one day classes may be taken in addition to a two week class.  

IMPORTANT! YOU MUST SELECT A 1ST, 2ND OR 3RD CHOICE FROM THE DROP-DOWN MENU (WHERE

THE ZERO IS)  OR YOUR CLASS SELECTION WILL NOT SHOW UP ON THE SUBMITTED CONFIRMATION PAGE.

 

ONE WEEK CLASSES - Choose your 1st, 2nd, or 3rd choices by using the drop-down menu next to the zero. (CLICK ON THE DOWN ARROW FOR CHOICE). For class dates use the drop-down menu next to the class. (CLICK ON THE DOWN ARROW FOR DATES). If you wish to sign up for more than one date for the same class - submit the form again or type your additional choices in the COMMENTS section.
HEAVY HIGHWAY II NEW!
CHOICE----____CLASS DATES
DOZER II NEW!
CHOICE----____CLASS DATES
GRADER II NEW!
CHOICE----____CLASS DATES
Wind Turbine
CHOICE----____CLASS DATES
Basic Maintenance
CHOICE----____CLASS DATES
Electrical Maintenance
CHOICE----____CLASS DATES
Hydraulic Maintenance
CHOICE----____CLASS DATES
 Powertrain Maintenance
CHOICE----____CLASS DATES
Load Charts & Regulations
CHOICE----____CLASS DATES
 40-Hour HAZMAT
CHOICE----____CLASS DATES
Geo-Thermal
CHOICE----____CLASS DATES
 Basic Grade
CHOICE----____CLASS DATES
Advanced Grade
CHOICE----____CLASS DATES
Welding Overview Class - 40-Hour
CHOICE----____CLASS DATES
Construction Regulations
CHOICE----____CLASS DATES

IMPORTANT! YOU MUST SELECT A 1ST, 2ND OR 3RD CHOICE FROM THE DROP-DOWN MENU (WHERE THE ZERO IS)  OR YOUR CLASS SELECTION WILL NOT SHOW UP ON THE SUBMITTED CONFIRMATION PAGE.

FOUR DAY CLASS -Choose your 1st, 2nd, or 3rd choices by using the drop-down menu next to the zero. (CLICK ON THE DOWN ARROW FOR CHOICE). For class dates use the drop-down menu next to the class. (CLICK ON THE DOWN ARROW FOR DATES).If you wish to sign up for more than one date for the same class - submit the form again or type your additional choices in the COMMENTS section.
OSHA 30
CHOICE----____CLASS DATES
 IMPORTANT! YOU MUST SELECT A 1ST, 2ND OR 3RD CHOICE FROM THE DROP-DOWN MENU (WHERE THE ZERO IS)  OR YOUR CLASS SELECTION WILL NOT SHOW UP ON THE SUBMITTED CONFIRMATION PAGE.

THREE DAY CLASS -Choose your 1st, 2nd, or 3rd choices by using the drop-down menu next to the zero. (CLICK ON THE DOWN ARROW FOR CHOICE). For class dates use the drop-down menu next to the class. (CLICK ON THE DOWN ARROW FOR DATES).If you wish to sign up for more than one date for the same class - submit the form again or type your additional choices in the COMMENTS section. No Per Diem paid.
MSHA - NEW MINER
CHOICE----____CLASS DATES


 IMPORTANT! YOU MUST SELECT A 1ST, 2ND OR 3RD CHOICE FROM THE DROP-DOWN MENU (WHERE THE ZERO IS)  OR YOUR CLASS SELECTION WILL NOT SHOW UP ON THE SUBMITTED CONFIRMATION PAGE.

TWO DAY CLASSES - Choose your 1st, 2nd, or 3rd choices by using the drop-down menu next to the zero. (CLICK ON THE DOWN ARROW FOR CHOICE). For class dates use the drop-down menu next to the class. (CLICK ON THE DOWN ARROW FOR DATES).If you wish to sign up for more than one date for the same class - submit the form again or type your additional choices in the COMMENTS section. No Per Diem paid.
OSHA 10 +
CHOICE----____CLASS DATES
Crane Rigging Safety Qualification
CHOICE----____CLASS DATES


IMPORTANT! YOU MUST SELECT A 1ST, 2ND OR 3RD CHOICE FROM THE DROP-DOWN MENU (WHERE THE ZERO IS)  OR YOUR CLASS SELECTION WILL NOT SHOW UP ON THE SUBMITTED CONFIRMATION PAGE.

ONE DAY CLASSES -Choose your 1st, 2nd, or 3rd choices by using the drop-down menu next to the zero. (CLICK ON THE DOWN ARROW FOR CHOICE). For class dates use the drop-down menu next to the class. (CLICK ON THE DOWN ARROW FOR DATES).If you wish to sign up for more than one date for the same class - submit the form again or type your additional choices in the COMMENTS section. No Per Diem paid.
Overhead Crane
CHOICE----____CLASS DATES
Competent Person
CHOICE----____CLASS DATES
CPR & First Aid
CHOICE----____CLASS DATES  
Labor History
CHOICE----____CLASS DATES
8-Hour HAZMAT Refresher
CHOICE----____CLASS DATES
Operator Qualification & Operator Qualification Refresher
CHOICE----____CLASS DATES
Tele-Handler/Forklift Certification
CHOICE----____CLASS DATES
 Tele-Handler/Forklift RE-CERT
CHOICE----____CLASS DATES
MSHA - Refresher
CHOICE----____CLASS DATES
Qualified Traffic Flagger
CHOICE----____CLASS DATES
Skidsteer Safety
CHOICE----____CLASS DATES
Qualified Signal Person
CHOICE----____CLASS DATES

 

If you wish to sign up for more than one date for the same class - submit the form again or type your additional choices in the comments section.

Comments -

Click the submit button only ONCE. Please be patient. It may take a few minutes

to submit, depending on the speed of your internet connection.

A confirmation page will appear once it has been submitted. This confirmation page

indicates classes that have been submitted. A written confirmation will be E-MAILED to the e-mail address provided within a week of receipt of your submission from e-mail address: woesiaf@gmail.com. Please add to your approved contacts/address book. No USPS mail will be sent.

 

NOTE TO APPRENTICES

You must complete at least 160 hours of related instruction per academic year (June 1, 2011  - May 31, 2012) or your apprenticeship may be cancelled by the State Bureau of Apprenticeship.  Apprentices must take ALL the required classes.

Total of 400 hours required.

Required 1st Year Classes - You must take the 1st Year classes if this is your 1st year in the program, regardless of what Pay Period you came into the program as.  Example you came into the program in 2011 as a 3rd Pay Period Apprentice.  You must take the 1st Year classes.

¨ Construction Regs (40 hours)

¨ 40-Hour Hazmat (40 hours) ¨ Basic Equipment (80 hours)

 

    Required 2nd Year Classes  

¨ Basic Grade (40 hours)

       Choice of:

¨ Basic Maintenance (40 hours) or Welding Basics (40 hours) -Prerequisite: 1500 OJT hours of Maintenance

       Choice of:

¨ Basic Excavating, Heavy Highway or Basic Crane (80 hours)

 

    Required 3rd Year Classes  

¨ 80-Hour Elective (Any courses totaling 80 hours - CDL, Dozer, Telescopic Crane, Lattice Crane, Intermediate Grade, Advanced Grade, Load Charts, etc.)

 

 

REMEMBER - Update your HAZMAT and MSHA yearly.  First Aid/CPR every two years.

Last updated: January 26, 2012

Wisconsin Operating Engineers Training Center
W11584 State Hwy 21
Coloma, WI 54930
(715) 228-4911
information@woetrainingcenter.org

INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE.

Apprentices Click here for Apprentice Class Information

NO PHONE RESERVATIONS WILL BE ACCEPTED - Placement in classes will be on first-come, first-serve basis. Every attempt will be made to place you in your 1st choice. Should any class be full you will automatically be placed as an alternate for that class. All classes are subject to change of location or cancellation due to lack of enrollment. All reservations will be confirmed in writing. If you need to cancel a class, please call as soon as you know you won’t be able to attend. Failure to call and cancel deprives others of the opportunity to attend the class. PLEASE NOTE: You may sign up for more than one class, but please be aware that you will be placed in only ONE two-week class (if space is available). We will put you on the alternate list for all other two-week classes that you request.  This is in order to give more operators a chance at training. You may register for one-week, two-day and one-day classes in addition to your two week class.

 
© Wisconsin Operating Engineers 2011, 2012